DVD Rebuilder Pro

[Silver Surfer]

Il miglior modo per clonare un DVD.
Si appoggia ad encoder professionali, come Cinema Craft Encoder o ProCoder, utilizzando come frame-server AviSinth.
Rende di facile gestione i settaggi, altrimenti complessi dei programmi di codifica.

[pila]

Versione 1.23.3
DVD Rebuilder PRO features:
NEW! Now you can use DVD-RB to create MOBILE video output!
Closed Captions - Now DVD-RB will extract closed caption data from the original DVD and remultiplex it into the MPEG stream during REBUILD.
Menu Encoding - The ability to scan and reencode menu segments in the same way as standard title sets.
Multiple encoder instances - On multiple core computers and some very fast single core computers using hyperthreading this will take advantage of unused processor time.
Movie and Menus Only capability - allows you to get the best quality within limited available space.
Movie and Menus Only capability - allows you to get the best quality within limited available space.
Segment Blanking - Provides you a capability to remove annoying intro screens.
Slideshow Mode - Convert "Extra" segments into a slideshow, saving valuable space for the Feature.
Advanced Encoding Features - Modify GOP size, add customized encoder quantizer matrices, set DC precision.
Movie-Only - mode that gives the highest quality possible. Every available bit is dedicated to the feature.
One pass encoding support for HC encoder - Gives high quality results in much less time.
Graphic Analysis display for use in analyzing the IFO structure - draws PGC/CELL relationships.
ISO file creation is now supported to make it easier to archive or burn DVD-RB's output.
Automatic burning using ImgBurn or DVD Decrypter - makes complete DVD Backup truly "one-click".
Remapping audio tracks - set the default to your language or preferred format.
New intuitive interface - modernizes and simplifies control of your rebuild!
Full support for video interleaving (ILVU) - re-encodes angle and seamless branching.
...and more... with many additional features planned in the near future!
DVD Rebuilder Professional Edition is automatically delivered to your e-mail box for any donation of $29.95 or more.

Se siete possessori VIP http://www.jdobbs.com/4650-5006-3790-47 ... 233Pro.exe

[Silver Surfer]

Changes in version 1.26.4:
- Added a REDISTRIBUTION threshold test that limits the amount of low-side deviation allowed in the calculation of redistribution. The default value of .5 limits a bitrate reduction (in redistribution) to half what would have been given in a standard DVD-RB encode. This dramatically reduces the likelihood of getting values that are too low in dark scenes. The threshold can be adjusted via a hidden setting in the OPTIONS area of REBUILDER.INI. The value (REDIST_LOW_THRESHOLD=) must fall in the range of 0 to 1. Any other value results in the default of .5
- Added a "hidden" setting called "REDIST_USE_FINAL_Q". If set to 1 (REDIST_USE_FINAL_Q=1) in the "[Options]" area of REBUILDER.INI, a set of prediction passes are run on the main-movie VTS (largest) to determine a Final_Q value that is used for REDISTRIBUTION rather than the standard Base_Q. This will add a little time to the PREPARE phase and some reports have been made of improved quality based upon subjective analysis.
- Corrected an error in which pushing the ABORT button could, under certain circumstances, leave an encoder executing in the background until it completes its current task. It might also result in a "Could not clear output..." error if an attempt to restart encoding happens too soon.
- Updated "Batch Mode" so that it will, when appropriate, write to blank disc. Note that you must (obviously) change discs between writes in order to write more than one during the batch process.
- Added a separator bar to the FILE menu to distinguish the "Shutdown on REBUILD" functions from those related to Batch.
- Other minor and cosmetic changes.

Homepage - http://www.jdobbs.net

Size: 11.0 MB

[Silver Surfer]

DVD-RB_v1.265Pro.

[Silver Surfer]

l'ultima è in betatester, che poi Piero mi sgrida:

The latest Professional Edition (VIP) version is v1.26.5, released on October 7th 2007.
Released only to VIP contributors. The Professional Edition includes numerous improvements over the freeware version and a newer modernized interface. Read about the Pro Edition here. See the changes for this version here. If you are a registered (paid) user you can download the new version from this link. Note: This version of the software is only for VIP users (donators) and will not function unless you are a registered user!

[Silver Surfer]

Per essere tassonomici

October 7th, 2007 (v1.26.5)
CHANGES MADE TO PRO VERSION

- Added a REDISTRIBUTION threshold test that limits the
amount of low-side deviation allowed in the calculation of
redistribution. The default value of .5 limits a bitrate
reduction (in redistribution) to half what would have been
given in a standard DVD-RB encode. This dramatically
reduces the likelihood of getting values that are too low
in dark scenes. The threshold can be adjusted via a
hidden setting in the OPTIONS area of REBUILDER.INI. The
value (REDIST_LOW_THRESHOLD=) must fall in the range of
0 to 1. Any other value results in the default of .5

- Added a "hidden" setting called "REDIST_USE_FINAL_Q". If
set to 1 (REDIST_USE_FINAL_Q=1) in the "[Options]" area of
REBUILDER.INI, a set of prediction passes are run on the
main-movie VTS (largest) to determine a Final_Q value
that is used for REDISTRIBUTION rather than the standard
Base_Q. This will add a little time to the PREPARE phase
and some reports have been made of improved quality based
upon subjective analysis.

- Corrected an error in which pushing the ABORT button could,
under certain circumstances, leave an encoder executing in
the background until it completes its current task. It
might also result in a "Could not clear output..." error
if an attempt to restart encoding happens too soon.

- Updated "Batch Mode" so that it will, when appropriate,
write to blank disc. Note that you must (obviously)
change discs between writes in order to write more than
one during the batch process.

- Added a separator bar to the FILE menu to distinguish the
"Shutdown on REBUILD" functions from those related to
Batch.

- Added code to limit the sample size to 1% when performing
REDISTRIBUTE_FINAL_Q analysis. Any more is simply a waste
of time. Note this does NOT affect the percentage used for
determining REDISTRIBUTION -- only determining FINAL_Q.

- Corrected two bugs that were introduced in v1.26.4 (which
was released as a beta only).

- Other minor and cosmetic changes.

[Piero]

Ciao a tutti

Silver, la 1.26.5 non mi risulta come beta ma come final. Infatti ho ricevuto la e-mail di Jdobbs per scaricarla da sito ufficiale (sono VIP).
Mi interessava indicare che la versione 1.26.4 che gira in rete non era una versione ufficiale ma molto probabilmente una beta che si stava provando e che qualcuno ha fatto uscire senza l'avallo di Jdobbs.
Insomma , volevo solo mettere in guardia chi avesse voluto usarla.
Per questa volta non ti sgrido..............

Ciao e a presto

Piero

[Silver Surfer]

ma infatti io avevo pure scritto
"Note: This version of the software is only for VIP users (donators) and will not function unless you are a registered user!"

Era in beta fino al 7 ottobre, mi ha ingannato il fatto che non hanno aspettato un mio cenno per rilasciare la Final.

[Piero]

Perbacco Silver,
ti stanno scavalcando! Fossi in te protesterei con Jdobbs!!!!

Scherzi a parte, buona giornata a te e a tutto il forum

Piero

[Silver Surfer]

DVD Rebuilder PRO features:
NEW! Now you can use DVD-RB to create MOBILE video output!
Closed Captions - Now DVD-RB will extract closed caption data from the original DVD and remultiplex it into the MPEG stream during REBUILD.
Menu Encoding - The ability to scan and reencode menu segments in the same way as standard title sets.
Multiple encoder instances - On multiple core computers and some very fast single core computers using hyperthreading this will take advantage of unused processor time.
Movie and Menus Only capability - allows you to get the best quality within limited available space.
Movie and Menus Only capability - allows you to get the best quality within limited available space.
Segment Blanking - Provides you a capability to remove annoying intro screens.
Slideshow Mode - Convert "Extra" segments into a slideshow, saving valuable space for the Feature.
Advanced Encoding Features - Modify GOP size, add customized encoder quantizer matrices, set DC precision.
Movie-Only - mode that gives the highest quality possible. Every available bit is dedicated to the feature.
One pass encoding support for HC encoder - Gives high quality results in much less time.
Graphic Analysis display for use in analyzing the IFO structure - draws PGC/CELL relationships.
ISO file creation is now supported to make it easier to archive or burn DVD-RB's output.
Automatic burning using ImgBurn or DVD Decrypter - makes complete DVD Backup truly "one-click".
Remapping audio tracks - set the default to your language or preferred format.
New intuitive interface - modernizes and simplifies control of your rebuild!
Full support for video interleaving (ILVU) - re-encodes angle and seamless branching.
...and more... with many additional features planned in the near futur

[Silver Surfer]

DVD ReBuilder 1.26.6 PRO
http://www.jdobbs.com/1334-0199-6743-18 ... 266Pro.exe

That's where DVD ReBuilder (DVD-RB) comes in. This program was built to bridge the gap between the incredibly easy but limited "one-click" solutions and the incredibly complex but high-quality methods of DVD ripping and backup. Another advantage of DVD-RB when compared to older methods is that it doesn't require access to an expensive authoring package. DVD-RB includes its own reauthoring engine that reconstructs the DVD in a way compatible with its original design.

Over the course of the past couple of years DVD ripping techniques have changed dramatically. Newer "one click" programs have made backing up a DVD a fairly simple process... but there is a significant trade-off. The quality that can be attained by even the best of these programs is poor in comparison to original techniques that used Cinemacraft Encoder, TMPGEnc, or other top-notch encoders. The reason is simple. When using one of these encoders the picture is rebuilt from scratch and optimized for the resulting bit rate. One-touch transcoders usually change quantization and/or motion info in order to lower the bit rate. This can result in pixelation and poor overall picture.

DVD Rebuilder PRO features:
- Closed Captions - Now DVD-RB will extract closed caption data from the original DVD and remultiplex it into the MPEG stream during REBUILD.
- Menu Encoding - The ability to scan and reencode menu segments in the same way as standard title sets.
- Multiple encoder instances - On multiple core computers and some very fast single core computers using hyperthreading this will take advantage of unused processor time.
- Movie and Menus Only capability - allows you to get the best quality within limited available space.
- Movie and Menus Only capability - allows you to get the best quality within limited available space.
- Segment Blanking - Provides you a capability to remove annoying intro screens.
- Slideshow Mode - Convert "Extra" segments into a slideshow, saving valuable space for the Feature.
- Advanced Encoding Features - Modify GOP size, add customized encoder quantizer matrices, set DC precision.
- Movie-Only - mode that gives the highest quality possible. Every available bit is dedicated to the feature.
- One pass encoding support for HC encoder - Gives high quality results in much less time.
- Graphic Analysis display for use in analyzing the IFO structure - draws PGC/CELL relationships.
- ISO file creation is now supported to make it easier to archive or burn DVD-RB's output.
- Automatic burning using ImgBurn or DVD Decrypter - makes complete DVD Backup truly "one-click".
- Remapping audio tracks - set the default to your language or preferred format.
- New intuitive interface - modernizes and simplifies control of your rebuild!
- Full support for video interleaving (ILVU) - re-encodes angle and seamless branching.
...and more... with many additional features planned in the near future!

Changes in version 1.26.6, January 5th, 2008:
- Corrected a bug in which the MPEG2DEC_OPTS parameters were not being applied during Q analysis. This could, in some cases, result in an error.
- Added code to MOBILE encoding to prevent identical PGCs from being reencoded redundantly (duplicates).
- Added more granularity to the matrix selections. Now you can choose matrices for High (4000Kbs), MedHigh (3500), Med (3000) in addition to those already selectable.
- Corrected an error in which having CCE SP2 installed by itself did not activate the "CCE Mode" under the ENCODERS menu.
- Fixed an error in which loading a project file would not reset the "HC_FOR_REDIST" flag.
- Fixed a bug in which the OPV subroutine could cause a size error caused by an incorrect maximum bitrate. This could also cause anomalies in REDISTRIBUTION passes.
- Added code to adjust for an issue in which audio sync could be off for MOBILE encoding for some oddly formatted discs.
- Changed the MOBILE settings so that any specified bitrate less than 50 is considered a Q value rather than 31 (for compatibility with H264 Q values). Illegal values on codecs that accept no more than 31 are automatically limited.
- Added NicMP4Box.exe to the full (MOBILE) installer package. This allows DVD-RB to create H264 files (using FFMPEG) in the MOBILE encoding mode that are compatible with the IPOD. NicMP4Box is called automatically when the IPOD_H264 codec is selected.
- Added two new profiles to the MOBILE.INI file. These allow you to take advantage of the H264 (high quality) format when creating output for the IPOD. Say "yes" to overwriting your MOBILE.INI file in order to see the new profiles.
- Updated the installation package to include HC Encoder v0.22 which includes several improvements over previous versions.
- Updated the installer to include ECLPRO v1.11.
- Other minor and cosmetic changes.

Homepage - http://www.jdobbs.net

Size: 11.5 MB

[Silver Surfer]

DVD ReBuilder v1.27.0
http://www.jdobbs.com/2549-1285-1895-89 ... 270Pro.exe

CHANGES MADE TO PRO VERSION
- Fixed an error in which the path for NicMp4Box.exe was not
being automatically detected.
- Updated routines so that when DVD-RB is running multiple
instances of HC Encoder the "*NOSMP" setting is used. This
has been tested to show faster processing on DVD-RB -- as
it already takes advantage of multiple processors.
- Update the HC interface so it specifically indicates whether
a file should be encoded as "*PROGRESSIVE or "*INTERLACED".
- Modified the REDISTRIBUTION and OPV prediction code for HC
Encoder. It should now take fewer passes for prediction in
most cases.
- Added a check for illegal characters in VOLUME_ID. This
condition could cause a failure to create an ISO image.
- Updated the "Close DVD-RB at batch completion" function so
it "sticks" between runs. Now the setting remains in
effect until reset.
- Wrote code to circumvent a source of "Runtime Error 52"
errors during the file copy section or "Buffer Overflow 0003"
in the REBUILD phase on certain types of corrupt sources.
- Made handling of certain sources that fall outside standards
more robust.
- Updated D2V creation routines to assume BT.601 colorimetry
where no SEQUENCE_DISPLAY_EXTENSION is present. Added a
"hidden" option called "BT601_DEFAULT=0" to the "[Options]"
area of REBUILDER.INI. This option can make DVD-RB assume
all unspecified streams to be BT.709 instead. This is
mainly for non-DVD sources. The default value is "1"
(BT.601 is the assumption).
- Added an additional filter prefix. When prefixed by "b:" a
filter is added only when the source colorimetry is BT.709
(including SMPTE 240M). This enables cases where you wish
the output to be converted, for example to BT.601. This
option is similar to "c:" but has an opposite effect.
- Corrected an error in which One Pass Encoding could, under
certain rare circumstances, select an incorrect Q/CQ value
and as a result over or undersize.
- Corrected an issue that could slow processing considerably
when a combination of encoding and extracting is occurring.
- Cleaned up a cosmetic glitch in which sometimes the "Overall
Progress" bar didn't correctly show status during ENCODE.
- Fixed an error in which Final_Q could not be calculated with
QuEnc or a command line encoder (that supports CQ).
- Improved the interface for CMDLINE encoding -- now the CQ is
passed as a floating point variable for more accurate sizing
during one-pass and REDISTRIBUTION.
- Modified the default values for PFactor and BFactor when
running HC Encoder in One Pass CQ mode.
- Improved the CMDLINE encoder interface so that it now also
passes "Closed GOP" (for ILVU) and "Bottom Field First"
(for interlaced encoding) information to the encoder.
- Made some small changes to the QuEnc interface to restore
FreeEnc compatibility.
- Added multiple threading capability to the MOBILE encoding
command line. This will speed up processing substantially
for those with multiple processors (e.g. dual/quad cores).
- Added additional checks to for encoders. Prevents encoders
from being enabled when they don't really exist.
- Other minor and cosmetic changes.

[Silver Surfer]

DVD ReBuilder v1.27.1
Author: JDOBBS

Copyright (c) 2004-2008 by jdobbs softworks. All rights reserved.

CHANGES MADE TO PRO VERSION
- Corrected an error introduced in version 1.27 that would
cause serious audio muxing problems.
- Fixed a source of a possible "Runtime Error 6"

[Silver Surfer]

DVD ReBuilder v1.27.1
http://www.jdobbs.com/2549-1285-1895-89 ... 271Pro.exe

[Silver Surfer]

DVD ReBuilder v1.27.2
Author: JDOBBS

Copyright (c) 2004-2008 by jdobbs softworks. All rights reserved.

CHANGES MADE TO PRO VERSION
- Added a new hidden setting called "HC_NOSMP" to the
REBUILDER.INI file. Setting "HC_NOSMP=1" (the default
setting) disables the use of SMP when multiple instances
are used. "HC_NOSMP=0" will allow SMP to run. Generally
the default (No SMP) is faster when run with multiple
processes, the parameter is provided to let the user
make the ultimate choice.
- Added a "Use *AVSRELOAD Parameter" option to the
"HC OPTIONS" menu which will add that value (useful for
certain scripts) to the INI files passed to HC encoder.
- Reversed the v1.27.0 implementation that waits for an
encode to complete before extracting. It appears to slow
down encodes on some systems. Go figure. You can still
enable this feature, however, by adding the hidden option
"WAIT_FOR_EXTRACT=1".
- Corrected an error in which the new matrix types were not
being saved in template files.
- Made adjustments to the sizing mechanism for Movie Only
encodes to prevent certain circumstances from resulting
in undersizing on seamless branching sources.
- Updated the SCR insertion routine to handle exceptionally
high SCR values.
- Updated code to make it more compatible with emulation
such as running under Linux/WINE.
- Adjusted build options to correct for a "crash" that was
reported by some users on the previous release.
- Other minor and cosmetic changes.

http://www.jdobbs.com/9406-6050-4720-97 ... 272Pro.exe

[Silver Surfer]

Released Professional Edition v1.27.3
March 27th, 2008 (v1.27.3)


CHANGES MADE TO PRO VERSION ONLY

Added a &quotUse *LOSSLESS Parameter" option to the "HC OPTIONS" menu which will add that value (useful for speeding up certain scripts) to the INI files passed to HC encoder. Note: Only works with HC v0.22.1 or greater.

Updated the ISO creation module so that now the ISO will be created by ImgBurn rather than MKISOFS if ImgBurn is installed and is of a high enough version to support it.

Modified the HC calling module so that encoder priority is set explicitly (based upon the option) in the HC.INI file (HC v0.22 and higher).

Corrected so that REDISTRIBUTION doesn't take effect when "MOBILE Only" encoding is selected (it is not used in that situation).

Changed the &quotCORRUPT SOURCE" error message to a warning and removed the annoying popup message. Some rippers remove CELLs as needed from the VOB (usually junk cells related to protection) without removing the reference to the CELLS in the IFO(s).

Built a workaround for movie-only PGC selection in discs that have incorrect information in PGC tables.

Corrected an error in which the batch shutdown had stopped working since v1.27.0. Note also, that the setting for batch shutdown is also now saved in the INI and will "stick" between runs. Older version required setting it before all batch runs.

Corrected an issue related to Vista in which running in &quotMultiple Encoder Processes" mode could cause HC and other encoders to fail with "Failed to find and run encoder..." This was caused by Vista's &quotimproved" security.

Modified loop checks during ILVU extraction in MOBILE encoding so the extraction stops more quickly if &quotAbort" is selected.

Changed the actions for unload queries to make DVD-RB a bit more robust in the event of problems.

Added additional checks to ensure CCE paths are correctly configured.

Updated the codes so that NICAUDIO.DLL doesn't have to be explicitly called out in the REBUILDER.INI file for use in MOBILE encoding.

Other minor and cosmetic changes.

[Silver Surfer]

[background=orange]Professional Edition v1.28.2[/background]

Improvements in compatibility with Vista. Now uses ImgBurn to create ISO files. Updated HC interfacing. Many other minor improvements and bug fixes.

[Silver Surfer]

DVD ReBuilder v1.28.2
Author: JDOBBS

Copyright (c) 2004-2008 by jdobbs softworks. All rights reserved.

CHANGES MADE TO PRO VERSION
- Made numerous changes to make DVD-RB more sensitive to
the security environment of Vista.
- Made changes to make DVD-RB more compatible with some
windows emulators.
- Added support for the HC adaptive quantization (*AQ)
function. This setting can improve picture in flat
parts. A default value of "2" is used, but can be
changed by setting "HC_AQ=n" in the "[Options]" area
of REBUILDER.INI. "n" can be any integer value between
0 and 4. "0" disables AQ and "4" results in lower
quants. Note: Keep in mind that due to virtualization
associated with VISTA, your most current INI may be
located in the VISTA VirtualStore. One easy way to
get to it (if you are using VISTA), is to create a
shortcut on your desktop that points to it.
- Added a parameter to the HC SETTINGS menu that enables
and disables LOGGING when encoding with HC encoder. The
log will be written to a file named "HCLOG.TXT" in the
working directory.
- Included HC Encoder v0.23 in the installation packages.
This version includes extended features and bug fixes.
- Added ability to have different 1st and 2nd passes when
using MOBILE encoding (see the MOBILE.INI template under
the AVCHD beta for an example.
- Added a "hidden" option called "ImgBurnDest" that, when
added to REBUILDER.INI will force the write to a specific
drive. This is expecially useful when working on a
computer that has more than one writable drive. As an
example, to force output to the "F:" drive you would add
"ImgBurnDest=F:" to REBUILDER.INI.
- Modified the TEMPLATE commands so they automatically
look in the VirtualStore for templates.
- Corrected "35601" error that could happen (very rarely)
on sources with no audio.
- Added a parameter to the REBUILDER.INI file so that an
alternate AVISYNTH resizing algorithm can be used for
certain functions (e.g. converting from 4:3 widescreen
to 16:9 anamorphic). The default is "LanczosResize".
Example usage: "RESIZE=Spline36Resize" Note: Adding
an incorrectly spelled resize parameter will cause your
encoding to fail.
- Other minor and cosmetic changes.

DVD-RB_v1.282Pro.exe

[Silver Surfer]

DVD ReBuilder 1.28.2 PRO

That's where DVD ReBuilder (DVD-RB) comes in. This program was built to bridge the gap between the incredibly easy but limited "one-click" solutions and the incredibly complex but high-quality methods of DVD ripping and backup. Another advantage of DVD-RB when compared to older methods is that it doesn't require access to an expensive authoring package. DVD-RB includes its own reauthoring engine that reconstructs the DVD in a way compatible with its original design.


Over the course of the past couple of years DVD ripping techniques have changed dramatically. Newer "one click" programs have made backing up a DVD a fairly simple process... but there is a significant trade-off. The quality that can be attained by even the best of these programs is poor in comparison to original techniques that used Cinemacraft Encoder, TMPGEnc, or other top-notch encoders. The reason is simple. When using one of these encoders the picture is rebuilt from scratch and optimized for the resulting bit rate. One-touch transcoders usually change quantization and/or motion info in order to lower the bit rate. This can result in pixelation and poor overall picture.

DVD Rebuilder PRO features:
- Closed Captions - Now DVD-RB will extract closed caption data from the original DVD and remultiplex it into the MPEG stream during REBUILD.
- Menu Encoding - The ability to scan and reencode menu segments in the same way as standard title sets.
- Multiple encoder instances - On multiple core computers and some very fast single core computers using hyperthreading this will take advantage of unused processor time.
- Movie and Menus Only capability - allows you to get the best quality within limited available space.
- Movie and Menus Only capability - allows you to get the best quality within limited available space.
- Segment Blanking - Provides you a capability to remove annoying intro screens.
- Slideshow Mode - Convert "Extra" segments into a slideshow, saving valuable space for the Feature.
- Advanced Encoding Features - Modify GOP size, add customized encoder quantizer matrices, set DC precision.
- Movie-Only - mode that gives the highest quality possible. Every available bit is dedicated to the feature.
- One pass encoding support for HC encoder - Gives high quality results in much less time.
- Graphic Analysis display for use in analyzing the IFO structure - draws PGC/CELL relationships.
- ISO file creation is now supported to make it easier to archive or burn DVD-RB's output.
- Automatic burning using ImgBurn or DVD Decrypter - makes complete DVD Backup truly "one-click".
- Remapping audio tracks - set the default to your language or preferred format.
- New intuitive interface - modernizes and simplifies control of your rebuild!
- Full support for video interleaving (ILVU) - re-encodes angle and seamless branching.
...and more... with many additional features planned in the near future!

Changes in version 1.28.2, July 12th, 2008:
* Made numerous changes to make DVD-RB more sensitive to the security environment of Vista.
* Made changes to make DVD-RB more compatible with some windows emulators.
* Added support for the HC adaptive quantization (*AQ) function. This setting can improve picture in flat parts. A default value of "2" is used, but can be changed by setting "HC_AQ=n" in the "[Options]" area of REBUILDER.INI. "n" can be any integer value between 0 and 4. "0" disables AQ and "4" results in lower quants. Note: Keep in mind that due to virtualization associated with VISTA, your most current INI may be located in the VISTA VirtualStore. One easy way to get to it (if you are using VISTA), is to create a shortcut on your desktop that points to it.
* Added a parameter to the HC SETTINGS menu that enables and disables LOGGING when encoding with HC encoder. The log will be written to a file named "HCLOG.TXT" in the working directory.
* Included HC Encoder v0.23 in the installation packages. This version includes extended features and bug fixes.
* Added ability to have different 1st and 2nd passes when using MOBILE encoding (see the MOBILE.INI template under the AVCHD beta for an example.
* Added a "hidden" option called "ImgBurnDest" that, when added to REBUILDER.INI will force the write to a specific drive. This is expecially useful when working on a computer that has more than one writable drive. As an example, to force output to the "F:" drive you would add "ImgBurnDest=F:" to REBUILDER.INI.
* Modified the TEMPLATE commands so they automatically look in the VirtualStore for templates.
* Corrected "35601" error that could happen (very rarely) on sources with no audio.
* Added a parameter to the REBUILDER.INI file so that an alternate AVISYNTH resizing algorithm can be used for certain functions (e.g. converting from 4:3 widescreen to 16:9 anamorphic). The default is "LanczosResize". Example usage: "RESIZE=Spline36Resize" Note: Adding an incorrectly spelled resize parameter will cause your encoding to fail.
* Other minor and cosmetic changes.

Homepage - http://www.jdobbs.net

Size: 10.8 MB

[spiderman]

E' da un pò che non aggiornano ............. sapete se l'ultima versione è compatibile con windows 7 ????

ciao